Irrigation

Team, here's how we handle our irrigation materials to ensure top performance and longevity:

General Safety:

• PPE: Use gloves when handling sharp parts like drip emitters or when cutting tubing. Eye protection is advisable when dealing with pressurized systems.

Installation of Sprinkler Heads:

• Correct Head: Choose the right sprinkler head for the area - fixed, rotary, or impact based on coverage and water flow needs.
• Height and Angle: Adjust heads to the correct height and angle to avoid water waste, obstructions, or plant damage. Use swing joints for flexibility.
• Check for Obstructions: Ensure no plants or hardscape will block the spray pattern after installation or growth.

Valve Installation:

• Location: Install valves where they're accessible but protected from damage. Use valve boxes or enclosures for outdoor installations.
• Wiring: Secure wiring properly to avoid disconnections or damage. Use waterproof connectors for outdoor connections.
• Testing: Test each valve post-installation to ensure it opens and closes correctly, and check for leaks.

Drip Irrigation Setup:

• Layout: Plan the layout to ensure even water distribution. Use pressure-compensating emitters for consistent flow across varied terrain.
• Filter and Regulator: Always install a filter before the drip lines and a pressure regulator to protect emitters from too much pressure or debris.
• Staking: Secure drip lines with stakes or pegs to keep them in place, especially in windy conditions or around active areas.

Controllers and Timers:

• Programming: Double-check all programming after installation. Ensure it matches the client's watering needs, considering plant types and local weather.
• Power Supply: Ensure the power source for electronic controllers is stable, whether it's wired or battery-operated.

Maintenance and Repair:

• Filter Cleaning: Regularly clean or replace filters to prevent clogging.
• Emitter Checks: Inspect drip emitters for blockages or leaks. Replace as needed.
• Leak Inspection: Check all connections, especially after the system has run, for any signs of leakage.

General Tips:

• Label Zones: Clearly label different zones on the controller for easy management and troubleshooting.
• Client Education: Show clients how to operate the system, including manual overrides and basic troubleshooting for common issues like clogs or misaligned heads.
• Documentation: Keep records of the layout, types of heads/emitters used, and controller settings for future reference or adjustments.

Post-Installation:

• Run Test: After installation, run the entire system to check for proper operation of all components. Adjust as necessary.
• Client Walkthrough: Walk through the system with the client, explaining maintenance, especially for drip systems which require more attention to prevent clogs.

Emergency Procedures:

• Valve Shutoff: Know the location of the main shutoff valve for quick response to any major leaks or system failures.

Remember, an irrigation system is about precision and care. Our goal is to create systems that not only work efficiently but also save water and support plant health. Let's keep our standards high with every irrigation project we undertake.